Heavy Equipment School – Landing Page

ContentsFlorida’s Best School for Heavy Equipment Operators & Truck DriversWe are Florida’s oldest and most trusted school to offer high-quality Commercial Driver’s License (CDL) training for truck driving and heavy equipment operation.FAQsHow long does it take to become a heavy equipment operator?How much do heavy machine operators make in Florida?Are heavy equipment operators in demand?What is…



Florida’s Best School for Heavy Equipment Operators & Truck Drivers

We are Florida’s oldest and most trusted school to offer high-quality Commercial Driver’s License (CDL) training for truck driving and heavy equipment operation.

If you are looking to become a heavy equipment operator or truck driver, National Training, Inc. has the other schools beat. Approved by the State of Florida and the Department of Highway Safety and Motor Vehicles as a coeducational career school located in Green Cove Springs, FL, we are the proud owners of America’s only 350-acre CDL training grounds which allows students to practice driving and operating heavy equipment in a safe environment.

We have successfully trained over 40,000 men and women since 1978 who have enjoyed a 98% course completion rate and a whopping 100% job placement rate in their chosen field of truck driving and heavy equipment operation.

Employers in the vast heavy equipment operating and truck driving industries in the US trust us, have ranked our heavy equipment and CDL training courses as some of the best in the country, and have therefore placed us in the top tier of all heavy equipment and truck driving schools making us your preferred training partner to embark on your career of heavy equipment operation and truck driving.

We’ve been around longer than most heavy equipment operator and truck driver training schools, which means our methods are time-tested and designed for equipping you for your new career. We are also licensed by the state of Florida Commission for Independent Education, which ensures sound education and training in private, post-secondary educational systems. Contact us today to schedule a tour or to find out more information on how NTI can help you reach your career goals in the heavy equipment operation industry.

FAQs

How long does it take to become a heavy equipment operator?

four months to four years

(Get More Info)

How much do heavy machine operators make in Florida?

The average salary for a equipment operator is $20.02 per hour in Florida and $6,750 overtime per year. 2.4k salaries reported, updated at August 12, 2022. Is this useful?

(Get More Info)

Are heavy equipment operators in demand?

The life of a heavy equipment operator is one where the demand for your services is expected to remain high. The U.S. Bureau of Labor Statistics estimated that jobs for heavy equipment operators would grow by 10 percent between 2018 and 2028. That rate is double the average rate compared to all other occupations

(Get More Info)

What is the highest paid heavy equipment operator?

High Paying Heavy Equipment Operator Jobs

  • Crane Operator. Salary range: $37,500-$62,500 per year. …
  • Yard Manager. Salary range: $34,000-$57,500 per year. …
  • Winch Truck Driver. Salary range: $50,000-$57,000 per year. …
  • Backhoe Operator. …
  • Rigger. …
  • Construction Equipment Operator. …
  • Motor Grader Operator. …
  • Front Load Driver.

(Get More Info)

Do you need a license to operate an excavator?

You need a driver’s license and/or a CDL (commercial driver’s license) to operate an excavator. Although you don’t need a special excavator license, most employers prefer that you are trained and certified.

(Get More Info)

Does OSHA require equipment operators to be certified?

The Occupational Safety and Health Administration (OSHA) only requires certain equipment operators to be certified. Those equipment operators are employees who run hazardous equipment such as cranes, industrial trucks and large construction equipment.

(Get More Info)

How much do bulldozer operators make in Florida?

The average salary for a bulldozer operator is $23.55 per hour in Florida. 107 salaries reported, updated at August 17, 2022.

(Get More Info)

Where do heavy equipment operators get paid the most?

Heavy Equipment Operator Salary By State FAQs

The highest-paid state for heavy equipment operators is New Jersey with an average salary of $65,211 per year.

(Get More Info)

Is heavy equipment a good career?

Yes, being a heavy equipment operator is a good job.

Heavy equipment operators can make upwards of $65,000, with the best of the best earning nearly $100,000 or more a year. In the heavy equipment operation industry, experience goes a long way.

(Get More Info)

Can a Heavy Equipment Operator make 6 figures?

At the big-picture level, heavy equipment operators will enjoy a median salary of $65,657 ? across all equipment and experience levels ? according to data collected as of Feb. 26, 2021. Approximately 50 percent of all heavy equipment jobs will have an annual salary ranging from $54,889 to $74,493.

(Get More Info)

What operator makes the most money?

Crane and backhoe heavy equipment operators typically make the most money. The national average salary for all heavy equipment operators is around $35,000 to $40,000 in a year.

(Get More Info)

Do heavy equipment operators get laid off alot?

Overall discharge numbers equaled 6.3% in 2019 and 2.8% in 2020. Adjusted for seasonal only layoffs, those numbers are 3.4% for 2019, and 2.8% for 2020.

(Get More Info)

What do heavy equipment operators do in the winter?

Mining and agriculture rely on heavy equipment while in winter, state and country authorities rely on heavy equipment operators to keep roads open. What caught my eye from Saturday’s job listings was the following: Operate dump truck with snow plow and salt spreader working snow and ice.

(Get More Info)

At what temperature should you not run heavy equipment?

Diesel Engines and Fuel Tips

The reason is that the hydrocarbons in diesel fuel can begin to gel when it drops below 40 degrees, and if gelling occurs, then the fuel loses some of its viscosity and has a hard time powering the engine components.

(Get More Info)

How long does it take for a excavator to warm up?

?Although warming up the excavator is always a good idea, it will not improve the hydraulic response time ? machines need to operate for about 30 minutes before the hydraulic systems will begin to respond better.?

(Get More Info)

Heavy Equipment Operator Training School | Orange Park FL

Heavy Equipment School – Landing Page National Training’s Heavy Now program is both challenging and rewarding to complete, and has been specifically designed with you and public safety in mind. With our Heavy Now course,  students are taught the safety and operation of bulldozers, articulating loaders, tractor/loader backhoes, excavators, laser survey technology & laser surveying. We emphasize hands-on learning as the primary vehicle to build your skills as a professional heavy equipment operator. HEOS enables students to benefit from an affordable training program that complies with the Workforce Innovation and Opportunity Act (WIOA), the State of Florida’s Commission for Independent Education, and NCCER Registered. NCCER Accredited The National Center for Construction Education and Research (NCCER) is a not-for-profit 501(c)(3) education foundation serving a broad spectrum of the construction and maintenance industries since 1996. It was developed with the support of more than 125 construction CEO’s and various association and academic leaders who united to revolutionize training for the construction industry. Sharing the common goal of developing a safe and productive workforce, these companies created a standardized training and credentialing program for the industry. Working in partnership with various sectors of the construction and maintenance industries, NCCER has dedicated itself to developing and maintaining quality curricula and a training process that is nationally recognized, standardized, portable, and competency-based. These credentials are then tracked through NCCER’s registry allowing organizations and companies to track the qualifications of their craft professionals and/or check the qualifications of possible new hires. Heavy equipment operators (HEO) not only work on regular construction building jobs, but also on infrastructure projects (roads, bridges, and ports, otherwise called non-building construction), and in mining and timber operations. A trained and experienced equipment operator provides necessary skills for any project that requires moving and transporting heavy materials, or that demands any kind of earthmoving. Certain members of National Training’s instructional staff hold NCCER Master Training credentials. The Next Heavy Now Class Begins ::: The National Training Difference Companies are ready and eager to hire our graduates. Why? Because National Training Inc. trains our students on real heavy equipment in various parts of our own private 350 Acre modern training facility. Employers know that graduates who have had “hands on, in-the-seat” training bring valuable real-world experience with them. We’ve been training Heavy Equipment Operators in the Jacksonville FL area since 1978 National Training Inc. has trained and graduated over 40,000 heavy equipment operators and truck drivers since we opened our doors in 1978. The best companies want the highest quality students and know that a well trained employee will be more productive, more responsible, and ensure safety standards are maintained while on the job. Many people ask us what makes National Training, Inc. a better choice. The answer is simple – from staff & instructors to our custom 350-acre training complex, we have the best of the best to help you become a well-trained entry-level heavy equipment operator. Whether you are just starting out or wanting to start over with a career in the heavy equipment operations field, National Training Inc. is with you every step of the way. Contact us today to get started! Hands-on Equipment Training No simulators here! During your Heavy Now course with National Training Inc. you will be spending 136 hours of total hands-on equipment time performing various projects and exercises throughout our private 350 Acre training grounds. These exercises will utilize our bulldozers, loaders, backhoes and excavators. Classroom Hours Hands-on Training Hours Total Training Hours Take A Tour Come see our heavy equipment, tour our 350 Acre custom training grounds, and meet the people dedicated to preparing you for a rewarding career in heavy machine operating. Have Questions? We’ve got answers. Our Admissions Representatives are happy to speak with you and answer all of your questions about our school and a career in heavy equipment operating. A Few Words From Some of the Many Companies Who Hire Our Grads We have long recognized the need for entry-level training in the construction and utilities industries and we support NTI in their effort to provide quality, affordable job and career training. The Bobcat Company At Aerotek we…

Read More

Florida's Best School for Heavy Equipment Operators & Truck …

The School Florida’s Best School for Heavy Equipment Operators & Truck Drivers We are Florida’s oldest and most trusted school to offer high-quality Commercial Driver’s License (CDL) training for truck driving and heavy equipment operation. If you are looking to become a heavy equipment operator or truck driver, National Training, Inc. has the other schools beat. Approved by the State of Florida and the Department of Highway Safety and Motor Vehicles as a coeducational career school located in Green Cove Springs, FL, we are the proud owners of America’s only 350-acre CDL training grounds which allows students to practice driving and operating heavy equipment in a safe environment. We have successfully trained over 40,000 men and women since 1978 who have enjoyed a 98% course completion rate and a whopping 100% job placement rate in their chosen field of truck driving and heavy equipment operation. Employers in the vast heavy equipment operating and truck driving industries in the US trust us, have ranked our heavy equipment and CDL training courses as some of the best in the country, and have therefore placed us in the top tier of all heavy equipment and truck driving schools making us your preferred training partner to embark on your career of heavy equipment operation and truck driving. We’ve been around longer than most heavy equipment operator and truck driver training schools, which means our methods are time-tested and designed for equipping you for your new career. We are also licensed by the state of Florida Commission for Independent Education, which ensures sound education and training in private, post-secondary educational systems. Contact us today to schedule a tour or to find out more information on how NTI can help you reach your career goals in the heavy equipment operation industry.

Try for Free

Heavy Equipment Operator Requirements in Florida

Heavy Equipment Operator Requirements in Florida Growth Trends for Related Jobs Tracy Hodge • Updated August 26, 2019 nd3000/iStock/GettyImages Florida heavy equipment operators may operate machinery such as forklifts, cranes and bulldozers. This is a highly specialized field that requires training and skill. Heavy equipment operators must also be able to perform maintenance and repairs on the equipment and may travel to and from construction sites with their machinery. Commercial Driver’s LicenseHeavy equipment operators in Florida must posses a commercial driver’s license or CDL. In order to obtain this license, the operator must have a valid Florida driver’s license and be over the age of 18. In Florida, additional documents such as a DOT (department of transportation) physical and a social security card may be required to obtain a CDL. Those who wish to obtain a CDL must pass a written and a driving exam before the license will be issued. Florida residents who wish to apply for a CDL license should check in their own county for any additional requirements. ExperienceIn order to operate heavy equipment in Florida, it is important to have a working knowledge of heavy equipment and experience with this type of machinery. This may include becoming familiar with traffic laws, safety rules, hazards, operation of equipment and maintenance of heavy equipment. In some states such as Florida, it is necessary to obtain a license for a specific piece of heavy equipment such as a crane. Crane operators must obtain a certification by passing a written test as well as a skills test. Other requirements include passing a DOT physical and being over the age of 18. Heavy equipment operators are required to maintain any certificates or licenses needed to perform their job in the state of Florida. Physical RequirementsHeavy equipment operators must meet certain physical requirements. These requirements may include having vision that is adequate to drive and judge distances and the physical ability to operate and move heavy equipment. Climbing up and down large pieces of heavy machinery often requires the operator to have good balance and be agile. Lifting heavy objects may be required when operating heavy equipment and all operators must be able to lift heavy weights on a daily basis. References Writer Bio Tracy Hodge has been a professional writer since 2007. She currently writes content for various websites, specializing in health and fitness. Hodge also does ghostwriting projects for books, as well as poetry pieces. She has studied nutrition extensively, especially bodybuilding diets and nutritional supplements. Photo Credits nd3000/iStock/GettyImages

Get the Info

Heavy Equipment Operator School in Florida & Salary Year …

Heavy Equipment Operator School in Florida & Salary Year 2018 Heavy equipment operation is a highly specialized field and requires someone, who wants to get into this, to be highly skilled and properly trained. Where else can you go get trained? You can enroll in a heavy equipment operator school in Florida to have a formal education. Completion of training programs can open opportunities to get employment in construction sites, mining, logistics and in many other industries. You can reach your full potential as a heavy equipment operator by taking a training course. The pay is good and you can expect long-standing and continuous employment. This industry will persist and flourish in the next coming years. Before you enroll, you may be wondering if becoming a heavy equipment operator suits you, here’s an article to READ:  Is Becoming a Heavy Equipment Operator the Right Job for You?

Explore More

Heavy Equipment Operator School In Florida

Florida Heavy Equipment Operator School Looking for a Heavy Equipment School that is in the vicinity of your home? Well then you can find it right here. . At Heavy Equipment Training, you will find a heavy equipment training program designed for those interested in the field of heavy equipment operation. Your career as a Heavy Equipment Operator Heavy Equipment Training is essential to gain the certification or license to operate the construction equipment. Though the certification is not compulsory in all the states, it will surely help you improve your chances for employment. Depending upon the certification you are allowed to operate various types of heavy equipment such as bulldozers, loaders, excavators, graders, etc. Our expert instructors are waiting to provide you with a high-quality education. We utilize the latest technologies and materials for the Heavy Equipment Training Program along with a great emphasis on hands-on training and practical skills. Want to know more about the Heavy Equipment Training Program? Just fill in the ‘Request Information’ form and we will get back to you with the locations of all the schools and colleges that are nearest to your home. A great opportunity to make an excellent career as a Heavy Equipment Operator is now within your reach. So don’t waste time in thinking. Find out how this Heavy Equipment Training School can help you take charge of your new career, today! Orlando Heavy Equipment Operator Training. Heavy equipment operator training is a diverse field. Job duties and required skills vary greatly depending on a professional’s area of expertise, and as such training programs are often uniquely tailored to these specific skills. Training programs aren’t plentiful in the Orlando area,… National Heavy Equipment Operator Training School provides with a fully licensed program for entry-level machinery and heavy equipment operators. Heavy Equipment Operator School In Arkansas University of Arkansas at Monticello – CTM – Warren Location … FICE / School ID … Program Name: Arkansas heavy equipment operator Training Academy. 167 Heavy Equipment Operator jobs available in Arkansas on Indeed.com. Apply to Operator, Equipment Operator, Excavator Operator and more! Salaries for Construction Equipment Operators in Arkansas Metro areas with the highest Prospective students searching for heavy equipment operator trade schools orlando florida found the following resources, articles, links, and information helpful. Since 1978, National Training, Inc.’s Heavy Equipment Operator School (HEOS) has offered a fully licensed program for entry-level machinery and equipment operators in the Heavy Excavating Industry. Since our establishment, we have successfully graduated over 38,000 students who have become heavy equipment operators or truck drivers in many of … Americas heavy equipment operator training school, crane operator school and truck driver school teaching hands-on training in the heavy equipment industry offer Employment Assistance following your heavy equipment, crane operation and cdl training school. People searching for heavy equipment operator trade schools in florida found the following related articles and links useful. Heavy Equipment Operator School In Maryland 191 Heavy Equipment Operator jobs available in Maryland on Indeed.com. Apply to Equipment Operator and more! heavy equipment operator jobs in Maryland. Filter results by Optional dump truck driver training is available including CDL Class B licensing … HCC’s Construction Equipment Operator class provides you with the skills to … Americas heavy equipment operator training school, Heavy Equipment Operator School In Minnesota Get your Heavy Construction Equipment Technology degree in Rosemount, Minnesota … All students applying for the transportation programs are REQUIRED to … for heavy equipment mechanics is expected to grow 14.6 percent in Minnesota … Unique, one of a kind program within Minnesota State. • high placement rate in an industry that has a high demand Heavy Equipment Operator. This position may be required to perform general welding, fabricating and modifying of materials and equipment. Such equipment includes:…. If you were in charge, what would you do to make SOUTH FLORIDA WATER MAN… What advice would you give the CEO of SOUTH FLORIDA WATER MANAGEMENT DIS… Americas heavy equipment operator training school, crane operator school and truck driver school teaching hands-on training in the heavy equipment industry offer Employment Assistance following your heavy equipment, crane operation and cdl training school. Campuses |…

View Details

Heavy Equipment Operation Program Miami – Course

Heavy Equipment Operation Program Miami – CourseA field that is diverse and on the cutting-edge. Introduction: Get started as a heavy equipment operator. This 600 hours heavy equipment operation program will prepare the student with simulators as well as hands-on-training using the high-quality equipment. Training includes basic equipment maintenance and safety. Graduates will be prepared to enter the workforce as entry-level operators. Career Opportunities: Skid Steer Loader Backhoe Loader Bulldozer CB-24 Double Roller (for Blue Top Road Work) Motor Grader-120M Water Truck Dump Truck Wheel Loader Employment Outlook: Overall employment of construction equipment operators is projected to grow 5% from 2020 to 2030. Salary: The average wage for this career in Florida is $20.44 hourly or $42,520 annually. Completion Requirements: The entire program is 600 hours. Students can earn a certificate at the completion of the following Occupational Completion Points (OCPs): OCPCOURSEHOURS OCP AHeavy Equipment Maintenance Technician150 Hours OCP BTractor Operator150 Hours OCP COff-road Equipment Operator 1300 Hours Total Hours: 600 Location & Course’s Schedule: Heavy Equipment Operation Technician is available at the following school (s): LOCATIONCOURSE’S SCHEDULE Miami Lakes Educational Center & Technical CollegeMonday – Friday from 8:00 a.m. to 1:40 p.m. Contact Information at the Location: Additional information can be provided by student services: LOCATIONCOUNSELOR / REGISTRAR PHONE NUMBER Miami Lakes Educational Center & Technical College (305) 557-1100Danielle Taylor Jackie Benjamin Vanessa Torres Elizabeth ForeroExt. 2230 Ext. 2215 Ext. 2250 Ext. 2216 Source Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, Construction Equipment Operators, on the Internet at https://www.bls.gov/ooh/construction-and-extraction/construction-equipment-operators.htm.

Yes! I want More

Heavy Equipment Operations Tech

Heavy Equipment Operations Tech The Florida Panhandle Technical College is committed to a policy of nondiscrimination in employment and education opportunity. No person shall be discriminated against or harassed in any educational program, services or activities, or employment conditions or practices on the basis of race, color, national origin, religion, sex, age, disability, marital status or sexual orientation. Accredited by The Accrediting Commission of the Council on Occupational Education7840 Roswell Road, Building 300, Suite 325 Atlanta, GA 30346 | Telephone: 800-917-2081 or 770-396-3898 | Fax: 770-396-3790

Learn More Now

How To Become a Heavy Equipment Operator | Indeed.com

How To Become a Heavy Equipment OperatorCareer developmentHow To Become a Heavy Equipment OperatorBy Indeed Editorial TeamUpdated October 5, 2021 | Published February 4, 2020Updated October 5, 2021Published February 4, 2020The Indeed Editorial Team comprises a diverse and talented team of writers, researchers and subject matter experts equipped with Indeed’s data and insights to deliver useful tips to help guide your career journey.Heavy equipment operators build roads, erect buildings and contribute to transportation infrastructure. Operators may work for the government or private employers. Most of the work is performed outdoors, and the job is often seasonal. Trained operators stringently follow safety procedures and are highly skilled in the operation and service of machinery.In this article, we will discuss what a heavy equipment operator does and steps to become one, as well as average salary and frequently asked questions about this career path.What does a heavy equipment operator do?A heavy equipment operator works in the construction industry to transport earth or other materials or to erect and install construction materials. Heavy equipment operators may lay down roadbeds and work with paving materials or they may prepare sites for construction. Operators know how to calculate appropriate loads and can read and follow blueprints and designs. They typically learn to maintain and ensure the proper use of machinery.Heavy equipment operators may use various types of heavy machinery, including:BulldozersCranesExcavatorsForkliftsLoadersBackhoeTractorsRead more: Guide: Using Indeed.com Job SearchHow to become a heavy equipment operatorHeavy equipment operators may get their start working on a construction crew to gain experience or enroll in an apprenticeship to learn while working. Traditional colleges or technical schools can provide education and prepare you for exams and licensing. Here are the steps to become a heavy equipment operator:Earn a high school diploma or GEDEnter and complete heavy equipment trainingEarn licenses or certificationsObtain a commercial driver’s licenseUpdate your resumeKeep learningRelated: 12 Jobs in Construction That Pay Well1. Earn a high school diploma or GEDHeavy equipment operators need a high school diploma or GED to enter an apprenticeship or technical school. High school courses that may be useful for future heavy equipment operators are:ShopMathematicsAuto technology2. Enter and complete heavy equipment trainingTraditionally, there are three ways to earn an education to operate heavy machinery. The first two involve entering either a union or state apprenticeship to gain plenty of on-the-job training and the potential for employment at the end of the apprenticeship. The third alternative is college or a technical school that provides training and licensing preparation.Unions and state apprenticeshipCollege or technical schoolClassroom trainingOn-the-job trainingUnions and state apprenticeshipUnion or state apprenticeships are generally open to students with little to no experience. Operators may be required to register with the state, although these stipulations may vary from state to state.Apprenticeships include both classroom and on-the-job training and students may earn a wage at the journey level. Classes are usually small, which means students can spend sufficient time learning with instructors. Apprenticeships can take three to four years to complete. For some, credits might be earned to apply toward a degree in construction. Apprenticeships offer more comprehensive training than schools and students learn to operate a wider variety of equipment.College or technical schoolThese schools may not have the capacity to offer as much hands-on experience as an apprenticeship. Students learn equipment regulation and safety equipment maintenance and repair, soil science, site grading and blueprint reading. Technical schools take one to two years to complete. Some schools may provide training on simulators before moving on to the actual machine. Schools may…

View More