Whether you repair or craft metal, your job should never lack the best metal glue. Any kind of glue can help you stick to metal, but only the best metal glue provides durability, ruggedness and durable bonding capabilities for metal tools.
However, not everyone uses metal glue properly. Don’t be surprised, we don’t apply glue on metal the right way. If you use metal glue properly, the adhesion will last a lot longer than usual.
Here’s how to properly use metal glue, read along to see if you’ve used it properly:
#1 Metal cleaning
The first step to lead you to the right way of using glue for mental is to clean the metal tools or clean the metal area that you need to glue. Make sure that the metal does not contain any debris or any rough edges before you proceed to glue the metal.
This is the step that helps the metal to stick together and create the best structure for adhesion. If there are any impurities such as dust or metal debris, this adhesion will never last.
And do not forget to touch the metal after cleaning it, as it may cause dirt or oil from your hands to prevent the metal glue from sticking for long.
#2 Attach metal glue
After you’ve cleaned the metal and made sure there are no impurities on it, it’s time to attach the metal to each other or attach the metal to another material.
Spread the metal glue over the area where the glue is to be attached, and you should also pay attention to the glue’s drying time and its evaporation capacity for timely adjustments.
If you use epoxy metal glue, pay attention to the time to mix the plastic and hardener, if the mixture is mixed too long, it will reduce the ability to stick.
Special note should never be careless to make metal glue stick to your hand because this glue has quite strong bonding ability.
Before the metal dries, you’ll have enough time to fix the area where you glue. However, you should note that each different type of glue will have different textures so that you need to adjust flexibly.
#4 Let dry
The final step is to dry the metal glue. If after adjustment, there is any excess, you should remove it immediately before the metal glue dries.